After a long, hard day of work, the thing everyone wants most is to have a sound sleep. For that, a comfy and stable bed is a must.
But sometimes the very things that are supposed to provide us with comfort become the reason for even more headaches. A bed that keeps sliding on its frame is one of them.
A bed slides on its frames for various reasons ranging from lack of proper support to being very old. Fortunately, there are more than one ways to prevent this from happening.
You can use velcro, rubber matting, and other various methods to keep your bed from sliding all around the frame and ruining your sleep night in and night out.
Let’s not muck around any further and take a look at how to stop the bed from sliding on the frame so that you don’t have to lose sleep over it.
Smart Hacks to Prevent a bed from sliding on its frame
How would you feel if with every movement you make while on it, your bed just keeps on moving around in its frame? I guess not very good since you are reading this article. Fret not as this problem has many straightforward solutions. Let’s get to it, shall we?
1. Using Rubber pads
The main cause of bed slipping is that the friction between the bed and the frame is minimal. So you can solve this problem by using something under your bed that isn’t smooth. Rubber pads are a prime example of such things.
The reason rubber pads are so popular is that they are very easy to obtain as well as cheap. Go to any DIY store near you and you will find a rubber pad. Then just spread it out under your bed and you will prevent your bed from slipping.
2. Using Velcro Strips
The very reason velcro strips exist is to hold things in place. So what better thing can you use to stop your bed from moving all over the place? These velcro strips come with adhesive that will keep the bed and its frame together and guarantee you a good night’s sleep. Just stick velcro strips to the four corners of your bed frame and attach the velcro side of those strips to the corresponding end of the mattress.
3. Using Non-slip mattress pads
Another very good and efficient way to keep your bed in place is to use mattress pads that aren’t susceptible to slipping. These are a bit more suitable for this purpose than rubber pads since these pads are made specifically for mattresses.
As a result, they are more durable than their rubber counterparts under the weight of the mattress as well as the people on them. The method of using it is pretty similar to that of the rubber pads, so you don’t need to worry about complications.
4. Cleaning the frame with a vacuum cleaner
Sometimes the bed moves around its frame not because of what it is made of, but because a layer of dust has accumulated under it. This layer of dust causes the bed to move about even though there is no apparent reason to do so.
The solution to this problem is very easy. All you need to do is to remove the mattress and vacuum both the underside of the mattress and the frame. Then just put the mattress back in its place and you will see that it is no longer moving about because of the slightest of movements.
5. Using mattress extenders
Another common reason for mattresses moving about in their frame is if it is too small compared to the frame. You can get rid of this problem by using mattress extenders. Make your mattress of the length and width you desire using mattress extenders. Gap fillers and paddings can also do the job perfectly.
6. Using carpet tapes
Carpet tapes are used to keep carpets and area rugs in place when they move around too much. The same thing can be applied to mattresses to keep them from slipping into their frames. But using carpet tapes is more of a short-term fix since the adhesives on these tapes are pretty strong. These strong adhesives can cause damage to your mattress.
7. Adding Railings
If your bed frame is made of metal, you can install railings on them to keep your bed in place. Once installed, these rails stay in place and keep the mattress exactly where they are supposed to be, entirely on the frame, not halfway down it.
8. Using Elastic straps
There’s no school like the old school, right? One of the more traditional ways of keeping your bed in its place is to just tie them down to the frame. But you need to use elastic straps instead of nonelastic ones to avoid damaging the mattress.
Remove the bed sheets and wrap the elastic straps in such a way that they go over the mattress and under the frame. Don’t use straps that are too small as they will certainly leave permanent dents on your mattress.
9. Buying a new mattress
Once your mattress becomes more than 10 years old, it becomes unusable very fast. No matter how many times you vacuum it, an old mattress will continue to gather dust underneath. So it’s better if you buy a new mattress if that’s the case.
What makes the bed move around in its frame?
You know how to stop a mattress from moving around in its frame, but why does it do that in the first place? What causes you to wake up in the middle of the night and find yourself hanging over the edge of the bed just because your bed can’t stay in its place? Look below to find out.
- Lack of friction
- Absence of Railings
- The mattress becomes too old
- Not enough support
- The size of the mattress not being compatible with that of the frame
Final words
What’s worst about perpetually moving beds is that you can’t do anything but lie still on them to prevent them from slipping, which is simply put, impossible. But, if you know what to do to prevent the bed from sliding, you can save yourself a lot of hassle just to keep it in place and ensure stress-free rest time.
This is Autem Decker. Main Author of ‘TheHomeDigs‘. You may not find her on the list of top 10 contemporary Canadian interior designers, but everyone who knows her says she was born to be an interior designer.
She makes her plan in her head and draws them in her years-old diary with a note in the corner. The way she plays with color and shape amazes us.
Connect Her On – Twitter
