Tips on How to Clean Sherpa Chair

Faux Sherpa chairs look gorgeous and bring a feel of aesthetics to your living room. Also, the warmer and softer feel of the Sherpa fabric is truly unbeatable. The only problem with these chairs is that they become dull and dirty soon.

Thus, you need to know how to clean Sherpa chair. You can clean the chair by dusting it, clean with the right liquid detergent, spraying a conditioner, and drying it properly.

How to Clean Sherpa Chair Properly

Although keeping a Sherpa chair is challenging, cleaning it is easy. You can choose the liquid detergent and conditioner combination for the best results.

Step 1: Dust off the chair and clean the surface

You need to apply the liquid detergent to the Sherpa fabric to clean it off and remove stains. However, you must remove the dust before the cleaning process. Use a brush or clean cloth to dust off the large residues, food particles, and dust from the fabric.

You may also use a vacuum cleaner to collect the dust particles properly. Finally, use a slightly damp cloth to clean the surface. It will take away many larger particles.

Step 2: Prepare and apply the cleaning mixture

You can easily prepare the cleaning mixture by adding water with a small amount of liquid detergent. Keep pouring a few drops of water and detergent to get the right texture. Ideally, you need 1 scoop of detergent to clean 1 to 2 Sherpa chairs.

It would help if you continued mixing them until they formed a foamy solution. Now, you can apply the foamy solution to the Sherpa fabric. You may use a toothbrush to apply the cleaning solution better.

Step 3: Start scrubbing the mixture

After applying the cleaning solution to the Sherpa chair surface;

  1. Wait for a few minutes.
  2. Then, start scrubbing off the fabric properly. You can easily scrub it with your hands.
  3. If you scrub it with a brush, work gently.

If you scrub Sherpa fabric too harshly, it will damage the fabric. Work with the fabric to scrub the entire surface accurately.

Step 4: Wipe and remove the cleaning solution

Now, dip a clean cloth in cold water. Use the dampened cloth to wipe out the cleaning solution from the fabric. You should move the wet cloth back and forth repeatedly. Also, apply little water to wipe out the solution better. It will help you eliminate the solution properly.

When you use the wet cloth to wipe out the mixture, you must work gently. If you put too much pressure, it will ruin the structure of the Sherpa fabric.

Step 5: Apply the conditioner and dry the fabric

Squeeze it after wiping out the dust and cleaning the mixture from the fabric. It will remove the remaining water. Then, apply a conditioner to the fabric. You must use water and conditioner in a 9:1 ratio. Apply it with a soft brush.

Finally, let the Sherpa fabric dry in the open air.

Read: How To Clean Microfiber Couch With Carpet Shampooer

Conclusion

Sherpa faux chairs are expensive. Thus, you won’t like to see it growing dirty and requiring replacement. In this case, this guideline on how to clean Sherpa chair will be useful. You can clean the chair with regular detergent and apply a conditioner to help retain its eye-pleasing look and softness.

Rate this post

Leave a Comment