Liquid Nail is one of the industry-leading construction and home adhesive manufacturers. You will see the use of Liquid Nails adhesives in heavy-duty construction sites, DIY crafting, industries, and where not.
People use these adhesives to bond, seal, and strengthen different joining points, materials, etc. Also, the adhesives of Liquid Nails harden faster than you imagine.
And once it hardens, you will find it difficult to remove from the laminate or other surfaces. As a result, people want to know how to remove Liquid Nails from laminate.
You can easily remove the Liquid Nails adhesive from laminate or drywall using a heat gun, blow dryer, mineral speeds, petroleum jelly, and baby oil. If all these methods fail to eliminate the adhesive from the surface, you can scrape it off with a putty knife and repair the floor as required.
Can Liquid Nails Adhesives Destroy Laminate?
You may want to know its usability when you work with Liquid Nails in DIY crafting or home improvement projects. Will the adhesives of Liquid Nails affect laminate or drywalls?
Well, adhesives won’t necessarily destroy the laminate floor or drywall. It will stick to the upper part of the laminate floor. However, the adhesive won’t pass through the upper surface to reach deep inside the laminated floor. You may, however, damage the walls if you try removing the adhesives hastily from the laminated space.
The Best Ways to Remove Liquid Nails from Laminate
Liquid Nails is a famous company for manufacturing high-quality adhesives of all sorts. So, when we say removing Liquid Nails, we indeed refer to removing the adhesives. So, you shouldn’t be misled by it and consider removing nail polishes.
In the next few sections, we will show you the best ways to remove Liquid Nails from laminate. We will also discuss the safety precautions you must take while removing the adhesives.
Method 1: Use a hairdryer or hot gun
Liquid Nails adhesives will harden extremely fast. So, they become sticky and solid within a few minutes once it drops on the laminate. You will, thus, need a hot gun or hair dryer to heat the adhesive. It will soften the adhesives and allow you to remove them.
- Turn on your hot gun or blow dryer. Then, reach over the adhesives to apply the heat to them.
- You should hold the heat gun 5 to 6 inches above the adhesives. Or else overheating the laminated surface may damage it.
- You need to continue heating the adhesive-stuck surface until it turns slightly liquid. It will form a putty-like consistency.
- Use a scraper or putty knife to scrape off the liquefied adhesives. Also, look for any remaining adhesives.
- Finally, it would help if you wiped off the laminated surface with a clean towel and water. It will remove any residues to keep the surface neat and clean.
Method 2: Apply baby oil or petroleum jelly
Maybe you don’t have the hot gun at home. It’s not a problem. You can use baby oil on the Liquid Nails to soften them and remove them afterward. Baby oils have skin-softening elements. It also works on the instantly hardened Liquid Nails adhesives.
Nonetheless, baby oil will also leave stains behind on the laminated surface. You will, subsequently, need to remove the oil stains too.
- Find a baby oil bottle and pour a few drops into the hardened adhesive.
- Spread the baby oil carefully over the entire adhesive. Then, wait for a few hours and reapply the oil once more.
- After waiting for 12 hours, inspect the adhesive on the laminate. It should become soft and ready for removal.
- Scrape off the softened adhesives from the floor with a putty knife.
- There will be oil stains on the laminated floor. You need to remove it with a vinegar solution.
Be careful to wipe off the oil stains after removing the Liquid Nails adhesives. Or else it may leave darker marks on the laminated surface.
Similarly, you can remove Liquid Nails from any surface using petroleum jelly. You can use regular petroleum jelly that you apply to your skin during winters. Thus, it is also a cost-cutting method to remove hardened Liquid Nails.
Method 3: Apply mineral spirits
Mineral spirits contain a low amount of alcohol in them. You can apply it on the tougher Liquid Nails adhesives to eliminate them fast. When you use mineral spirits, you need to apply them repeatedly 3 to 4 times. Otherwise, it will evaporate to leave the adhesive as dry as it was earlier.
- Use an old toothbrush to apply the mineral spirits to the adhesives.
- You must continue coating the surface 3 to 4 times with the mineral spirits for the next 12 hours.
- By this time, the adhesive will turn softer. If it feels solid, you may apply another coat of mineral spirit and wait for a couple of hours.
- Finally, use a scraper to remove the soft adhesive from the laminated surface.
The remaining spirit will evaporate soon and leave a clean laminate surface behind. It is a convenient method because it won’t cause any oily stains on the surface like baby oils or petroleum jelly. You will, however, need to apply the mineral spirit a couple of times repeatedly.
Read Next: Ways to Remove Construction Adhesive from Concrete
Precautions to Remove Liquid Nails from Laminate:
- Wear hand gloves when using mineral spirit or hot gun to wipe out adhesives from the laminate. Or else you may experience scalds in hand.
- Always ensure proper ventilation when applying mineral spirit or rubbing alcohol on the adhesives. Or else the indoor space may become flammable.
- When scraping the softened adhesive, use the scraper or putty knife carefully. You should choose a scrapper with a thin edge to work better. Don’t hasten, or you may damage the laminate.
Frequently Asked Questions
- Will WD 40 Remove Liquid Nails?
Yes, you can use WD-40 commercial cleaner to remove Liquid Nails adhesives. It works the same way different cleaning agents or household cleaning items work.
- How do you remove dried adhesive?
Using our methods to remove dried adhesive, you may use baby oil, mineral spirit, or commercial cleaner. Also, you may use vegetable oil or canola oil.
Liquid Nails come in handy in many home improvement and DIY projects. You don’t need to be frustrated if you accidentally put the adhesive on a laminate. You may easily apply mineral spirit, rubbing alcohol, etc., to weaken the dried adhesive.
After that, you may scrape the surface with a scraper or knife to remove the remaining Liquid Nails. Also, clean the surface with a cloth to remove any residues after use.
This is Autem Decker. Main Author of ‘TheHomeDigs‘. You may not find her on the list of top 10 contemporary Canadian interior designers, but everyone who knows her says she was born to be an interior designer.
She makes her plan in her head and draws them in her years-old diary with a note in the corner. The way she plays with color and shape amazes us.
Connect Her On – Twitter